Your choice has been saved

Meet us at the WindEnergy Hamburg 2022


Come and visit us in our stand in hall B6, booth 268 on WindEnergy Hamburg 2022 the 27- 30th September 2022.

Since the early days of the wind industry, wind power turbines around the world have been equipped with Leine Linde’s position rotary encoders.  Leine Linde encoders for nacelle and blade positioning have an application-fit design and qualified for up to 25 years of operational lifetime. Come and visit us and find out more about encoders, sensors and slip rings from HEIDENHAIN, AMO, LTN and LEINE LINDE for wind energy applications.

If you wish to make an appointment with us in advance, please contact us via info@leinelinde.com or find detailed contact information further down on this page.

Looking forward seeing you in Hamburg!

Products

Here are some of the products that we will be presenting in our stand on the exhibition.

MZI 594

– Developed in collaboration with wind turbine manufacturers

This type of inductive incremental encoder was developed based on what wind turbine producers have kept on asking for: long lifetime, minimized impact on performance due to environmental conditions and ease of installation and commissioning.

600 YAWMO®

Robust and versatile position measurement solution to monitor axis rotation in wind turbines and other large machines

The 600 YAWMO® sensors are well known for providing reliable position feedback for the wind turbine’s yaw system. The position sensor 600 YAWMO® is based on the Leine Linde 600 series, which is a robust absolute encoder with  disturbance-free inductive scanning – resistant to vibrations, moisture, dust, heat and cold. 

2000 Bearingless

For large shafts, tight spaces and long durability

The Bearingless 2000 series consists of big hollow shaft incremental encoders, made for mounting directly on large rotating shafts or to fit perfectly with the NEMA standard C-face motors. The series can be equipped with one or two sensor heads for contactless reading of the signal with or without redundancy. 

The series also includes ATEX-/IECEx-certified products and ADS Uptime™ for built-in condition monitoring.

Want to know more? Book a meeting today!

Contact us today to set up a meeting.

I would like to gain more information about: New inductive technology in motion control!

White Paper: Yield increase and load reduction



Imagine you have a component in your wind turbine that enables you to increase the annual yield by more than 0.15 % and reduce unnecessary mechanical loads by more than 0.8%.

 

Download our White Paper and found out more!

Encoders and sensors for wind energy applications



Reliable sensor solutions increase the efficiency and the lifetime of the wind power plant, which leads to a significantly lower levelized cost of energy (LCOE). Technologically advanced components made to fit – mechanically, electrically as well as with the right signals and interfaces – is enabling digitalization in the simplest way!

Sensors and electronics from Leine Linde are built for use in tough environments to minimize the need for maintenance or replacement in hard-to-access locations.

Meet us in our stand

Matthias Finke

Deputy Marketing Manager

m.finke@lenielinde.de

Fransesc Comas

Country Manager Spain & Portugal

Andreas Frochte

Regional Sales Manager Germany

Karsten Jeppesen

Sales Manager Denmark

Urban Norén

Sales Manager

u.noren@leinelinde.se

Klaus Korger

Regional Sales Manager Germany

Not going to WindEnergy Hamburg?

We will update our Youtube channel and LinkedIn with latest updates from the exhibition. Follow us for more information!