Encoder accessories, couplings, converters, and gateways

The right accessories for installation and extended functionality.

Leine & Linde offers a wide range of accessories for its encoders. Shaft couplings, connectors, measuring wheels and various types of mounting brackets are some of the accessories that are available.

Leine & Linde also offers several types of gateway for adapting encoder signals. A gateway is used together with an encoder and can convert its signals for a different desired interface, e.g. optical signals or PROFIBUS.

It is very important that all accessories used in an application are of the same high quality as the encoder. Therefore you should only use accessories that have been verified by us in terms of function and performance, as that is the best way to ensure that the accessories are the right quality.

Accessories 
Couplings Several types of couplings for installation of shaft encoders. The following types are available: bellow, membrane, oldham or double loop.
Download datasheet »
Connectors & cables Connectors for encoders, with or without assembled cable.
Download datasheet »
Draw wire Robust draw wire for linear measurement. 
Download datasheet »
Encoder switch Switch and splitter of incremental encoder signals.
Download datasheet »
Gateway CANopen Robust DIN-rail-mounted gateway between EnDat and CANopen.
Download datasheet »
Gateway EtherNet/IP Robust DIN-rail-mounted gateway between EnDat and EtherNet/IP.
Download datasheet »
Gateway PROFIBUS Robust DIN-rail-mounted gateway between EnDat and PROFIBUS.
Download datasheet »
Gateway PROFINET Robust DIN-rail-mounted gateway between EnDat and PROFINET.
Download datasheet »
Mechanical accessories Various mechanical installation kits for shaft and hollow shaft encoders.
Download datasheet »
Optolink A robust DIN-rail-mounted system for fibre-optic transmission of incremental encoder signals.
Download datasheet »
Signal converter Incremental signal converter for frequency to analogue and serial output.
Download datasheet »
Signal converter and/or splitter DMI Converter is a DIN-rail-mounted interface converter for incremental encoder signals and/or a signal splitter between HTL or RS422 signals.
Download datasheet »
Speed monitor DIN-rail-mounted system for monitoring of speed, stoppages or direction.
Download datasheet »
Test unit PWM 9 Test unit that enables function testing of incremental encoders. Checks, among other things, line count, accuracy and power consumption.
Download datasheet »